Skip to Content

If you don't see the product you need, please submit the manufacturer number here. We will provide a quote and lead time.

MultiPlus-II 12/3000/120-50 2x120V

https://www.nauticalsupplyoutlet.com/web/image/product.template/156/image_1920?unique=f25db1c

Manufacturer # PMP122305100

SPECIAL ORDER ONLY - SHIPS DIRECTLY FROM MANUFACTURER

Lead time start from 10 days, contact us for current information before ordering.

0.00 0.0 USD 1,408.00

1,408.00

Not Available For Sale

This combination does not exist.

Victron Energy

Attributes

  • Smart Technology Compatible: Not Compatible With Smart Technology
  • Compatibility: 12 Volt Batteries
  • Input Voltage: Inverter: 9.5 To 17 Volt DC/ Charger: 90 To 140 Volt AC
  • Peak Power Output: 5500 Watt
  • Continuous Power Output: 3000 Watt
  • Ampere Rating: 120 Amp
  • Efficiency: 93 Percent
  • Operating Temperature: -40 Degree Fahrenheit To 149 Degree Fahrenheit
  • Material: Steel
  • Waterproof Rating: IP22 Rated
  • Standards: UL 458/ EN-IEC 60335-1/ EN-IEC 60335-2-29
  • Includes: With M8 Bolts Battery Connection/ 4 Gauge Screw Terminals

Features & Benefits

  • 120/240V input and output or 120V input and output (always 120V output when in inverter mode)
  • PowerControl and PowerAssist - Boosting the capacity of the grid or a generator
  • Two AC Outputs
  • Virtually unlimited power thanks to parallel and three phase operation
  • On-site system configuring, monitoring and control
  • Remote configuring and monitoring
  • Limited 5 Year Warranty

Product Description

Victron MultiPlus II 2 x 120 Volt Inverter/Charger12VDC, 120Amp Charger, 120V/60 Hz, 3000 Watt Inverter120/240V input and output or 120V input and output (always 120V output when in inverter mode). The AC input can be supplied from a split phase 120/240V source, or single phase 120V source. When an AC source is available, the MultiPlus will feed through the AC to its output. The output will therefore mirror the AC input. The inverter/charger connects to the neutral and the preferred input line (L1). Power needed to charge the batteries will therefore be drawn from L1. The MultiPlus switches to inverter operation when no AC source is available. The inverter output is 120V single phase. In invert mode, the MultiPlus connects both output lines (L1 and L2) together to provide 120VAC to loads on either line. Any 240V loads will therefore be supplied only when the MultiPlus is supplied by a split phase AC source. This prevents heavy loads such as water heaters or 240V air conditioners from discharging the battery.PowerControl and PowerAssist - Boosting the capacity of the grid or a generator. A maximum grid or generator current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for battery charging, thus preventing the generator or grid from being overloaded (PowerControl function). PowerAssist takes the principle of PowerControl to a further dimension. Where peak power is so often required only for a limited period, the MultiPlus-II will compensate insufficient generator, shore or grid power with power from the battery. When the load reduces, the spare power is used to recharge the battery (available on L1 input only).The main output has no-break functionality. The MultiPlus takes over the supply to the connected 120V loads in the event of a grid failure or when shore/generator power is disconnected.

For product documentation and manuals visit here:

https://www.victronenergy.com/support